- 1985 Plastic Laminates Seminar : Charleston Marriott, Charleston, Sc, October 27-31, 1985, Atlanta, Ga (Tappi Notes)
- 1991 U S Foamed Plastics Markets and Directory
- 1991 U S Foamed Plastics Markets and Directory - 4-6 weeks - $65.00
- 1992 Rubber Red Book : Elastomerics
- 1993
Annual Book of Astm Standards : Section 6 : Paints, Related Coatings,
and Aromatics : Volume 6.03 : Paint--Pigments, Drying Oils, Polymers,
Resi
- 1993
Annual Book of Astm Standards : Section 8 : Plastics : Volume 8.04 :
Plastic Pipe and Building Products/Pcn No. : 01-080493-58
- 1993
Annual Book of Astm Standards : Section 9 : Rubber : Vol 09.01 :
Rubber, Natural and Synthetic- General Test Methods; Carbon Black/Pcn
01-090193
- 1993
Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 :
Rubber Products, Industrial- Specifications and Related Test Methods;
Gasket
- 1993 Rubber Red Book : Directory of the Rubber Industry
- 1994
Annual Book of Astm Standards : Section 6 : Paints, Related Coatings,
and Aromatics : Volume 06.03 : Paint Pigments, Drying Oils, Polymers,
Resi
- 1994 Annual Book of Astm Standards : Section 8 : Plastics : Volume 08.04 : Plastic Pipe and Building Products/Pcn 01-080494-58
- 1994 Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.01 : Rubber, Natural and Synthetic
- 1994
Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 :
Rubber Products, Industrial-Specifications and Related Test Methods;
Gaskets
- 1994
IEEE Rubber and Plastics Industry Technical Conference : Conference
Record of 1994 Forty-Sixth Annual Conference of Electrical Engineering
Probl
- 1995
Annual Book of Astm Standards : Section 6 : Paoints, Related Coatings,
and Aromatics : Volume 06.03 : Paint-Pigments, Drying Oils, Polymers,
Res
- 1995 Annual Book of Astm Standards : Section 8 : Plastics : Volume 08.04 : Plastic Pipe and Building Products/Pcn : 01-080495-58
- 1995
Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 :
Rubber Products, Industrial-Specifications and Related Test Methods;
Gaskets
- 1995 Coating Conference/01050495 : Stouffer Hotel, Dallas, Texas, May 19-20 (Proceedings (2 Vol Set))
- 1995 Dyes, Fillers & Pigments Short Course : Course Notes
- 1995 Tappi European Plastic Laminates Forum Proceedings Held November 15-17 in Heidelberg Germany
- 1996
Annual Book of Astm Standards : Section 15 : General Products, Chemical
Specialties, and End Use Products : Adhesives : Includes Standards of
the
- 1996
Annual Book of Astm Standards : Section 6 : Paoints, Related Coatings,
and Aromatics : Volume 06.03 : Paint-Pigments, Drying Oils, Polymers,
Res)
- 1996
Annual Book of Astm Standards : Section 9 : Rubber : Volume 09.02 :
Rubber Products, Industrial-Specifications and Related Test Methods;
Gaskets)
- 1996 Coating Binders Short Course Notes Held January 9-10, 1996 in Baton Rouge, LA
- 1996 Coating Conference : Oprayland Hotel, Nashville, Tennessee, May 19-22 (Tp 010504/96)
- 1996 Rubber Red Book
- 1996 Rubber Red Book (Issn 0361-0640.48th Ed)
- 1997 Coating Conference (Papers for 97 Conference)
- 1997 European Workshop on Materials for Advanced Metallization : Conference Microfiche No : 97Tm8287
- 2nd International Symposium on Polymer Electrolytes - 4-6 weeks
- 40th Annual Conference Preprint : Rp/C Reinforced Plastics/Composites '85 : 40 Years of Innovative Technology
- 41st Conference on Electrical Engineering Problems in Rubber and Plastics/89Ch2764-9-Bbl Mf
- A Glossary of Plastics Terminology in 5 Languages : English Deutsch Francais Espanol Italiano
- A Glossary of Plastics Terminology in 5 Languages : English, Deutsch, Francais, Espanol, Italiano
- Absorbent Polymer Technology (Studies in Polymer Science, 8)
- Additives
for Water-Based Coatings : The Proceedings of a Symposium Organised by
the North West Region of the Industrial Division of the Royal Societ
- Adhesion 11
- Adhesion 12
- Adhesion 14
- Adhesion : Technology, Performance and Trends/Marketing or Selling
- Adhesion and Adhesives : Science and Technology
- Adhesion Aspects of Polymeric Coatings
- Adhesion, 13
- Adhesive Bonding
- Adhesive Chemistry : Developments and Trends (Polymer Science and Technology, Vol 29)
- Adhesives (General Products, Chemical Specialties and End Use Products , No 15.6)
- Adhesives : Adhesives Sealants and Primers
- Adhesives Age Directory 1995 (Serial)
- Adhesives Age Directory 1996 (Serial)
- Adhesives Age Directory, 1994
- Adhesives and Sealants (Engineered Materials Handbook, Vol 3)
- Adhesives Engineering/Volume 1999
- Adhesives from Renewable Resources (Acs Symposium Series 385)
- Adhesives in Manufacturing
- Adhesives, Sealants and Coatings for the Electronics Industry
- Adhesives, Sealants, and Coatings for Space and Harsh Environments (Polymer Science and Technology, Vol 37)
- Advanced Catalysts and Nanostructured Materials : Modern Synthetic Methods
- Advanced Composite Materials Index : 1975-1984
- Advanced Composites Manufacturing
- Advanced
Multilayered and Fibre-Reinforced Composites : Proceedings of the NATO
Advanced Research Workshop on Multilayered and Fibre-Reinforced compos
- Advanced Polymer Composites
- Advanced Routes for Polymer Toughening (Polymer Science Library, 10)
- Advanced Surface Coatings : A Handbook of Surface Engineering
- Advanced Thermoplastic Composites : Characterization and Processing
- Advanced Thermoset Composites : Industrial and Commercial Applications
- Advances in Dendritic Macromolecules : 1994
- Advances in Exterior Body Panels/Sp-698
- Advances in Interpenetrating Polymer Networks V-1
- Advances in Interpenetrating Polymer Networks V-2
- Advances in Interpenetrating Polymer Networks V-3
- Advances in Interpenetrating Polymer Networks V-4
- Advances in Medical Plastics
- Advances
in Organic Coatings Science and Technology : 15th International
Conference in Organic Coatings Science and Technology Proceedings
- Advances in Organic Coatings Science and Technology, Vol 9
- Advances in Particulate Materials
- Advances
in Polyimide Science and Technology : Proceedings of the Fourth
International Conference on Polyimides, October 30-November 1, 1991
Ellenvil
- Advances in Polymer Blends and Alloys : Seminar Notes
- Advances in Polymer Blends and Alloys Technology
- Advances in Polymer Science : Metal Complex Catalysts-Superecritical Fluid Polymerisation-Supermolecular Architecture
- Advances in Polymer Science : Synthesis and Degradation Rheology and Extrusion
- Advances in Polyurethanes, Elastomers, Coatings, Adhesives and Sealants
- Advances in Silicone Chemistry
- Advances in Thermoplastic Matrix Composite Materials (Astm Special Technical Publication, 1044)
- Advancing Technology in Materials and Processes (Society for the Advancement of Material and Process Engineering Series, Vol 30)
- American Plastic : A Cultural History
- Amorphous
and Crystalline Insulating Thin Films--1996 : Symposium Held December
2-4, 1996, Boston, Massachusetts, U.S.a (Materials Research Society sy
- An Introduction to Composite Products : Design, Development and Manufacture
- An Introduction to Plastics
- Analysis and Deformulation of Polymeric Materials : Paints, Plastics, Adhesives, and Inks (Topics in Applied Chemistry)
- Analysis and Performance of Fiber Composites (Spe Mnographs)
- Analysis, Design and Optimization of Composite Structures
- Annual
Book of Astm Standards, 1997 : Paint-Pigments, Drying Oils, Polymers,
Resins, Naval Stores, Cellulosic Esters, and Ink Vehicles (Vol 06.03)
- Annual Book of Astm Standards, 1997 : Plastic Pipe and Building Products (Vol 08.04)
- Annual Book of Astm Standards, 1997 : Plastics II: D 2383-D 4322 (Vol 08.02)
- Annual
Book of Astm Standards, 1997 : Rubber Products,
Industrial-Specifications and Related Test Methods; Gaskets; Tires (Vol
09.02)
- Annual Book of Astm Standards, 1997 : Rubber, Natural and Synthetic-General Test Methods; Carbon Black (Vol 09.01)
- Antec, 1994 : Plastics : Gateway to the Future : Proceedings of Conference Held May 1994 (52nd)
- Antec, 1995 : Proceedings of 53rd Conference Held May 1995 in Boston, Massachusetts (53rd)
- Antec, 1996 : Proceedings of 54th Conference Held May 5
- Antioxidative Stabilization of Polymers
- Applications of Computer Aided Engineering in Injection Molding
- Applications
of Computer Modeling for Extrusion and Other Continuous Polymer
Processes (Computer Aided Engineering for Polymer Processing, Vol 3)
- Applied Stress Analysis of Plastics : A Mechanical Engineering Approach
- Aromatic High Strength Fibers (Spe Monographs)
- Aseptic Processing and Packaging of Particulate Foods
- Astm Protective Coating Inspection Standards for Field and Shop Applications
- Astm Standards on Environmentally Degradable Plastics
- Atlas of Polymer & Plastics Analysis, 2E, Vol. 1, Polymers, Structures & Spectra
- Atlas of Polymer and Plastics Analysis : Plastics Fibres, Rubbers, Resins
- Atlas
of Polymer and Plastics Analysis : Plastics Fibres, Rubbers, Resins -
Starting and Auxiliary Materials, Degradation Products
- Atlas of Polymer and Plastics Analysis, 3E, Vol. 1, Defined Polymers
- Atlas
of Polymer and Plastics Analysis, 3E, Vol. 2b, Analytical Methods,
Spectroscopy, Characteristic Absorptions, Description of Compound
Classes
- Atlas of Polymer and Plastics Analysis/Atlas Der Polymer-Und Kunststoffanalyse : Defined Polymers/Definierte Polymere/Volume 1
- Atlas of Polymers and Plastics Analysis
- Automotive Engineering Plastics
- B. F. Goodrich : Tradition and Transformation, 1870-1995 (Historical Perspectives on Business Enterprise Series)
- Back to the Future : Society of Plastics Engineers Antec 1992 50 Years Plastics Shaping the Future (Detroit May 3-7)
- Bakery Technology : Packaging, Nutrition, Product Development, Qa
- Barrier Polymers and Structures, 197th National Meeting of the American Chemical Society in Dallas, Tx, April 9-14, 1989
- Basic Principles of Rotational Molding
- Best of Designs in Plastics
- Biodegradable
Plastics and Polymers : Proceedings of the Third International
Scientific Workshop on Biodegradable Plastics and Polymers, Osaka, Japan
- Biodegradable Polymers and Plastics (Special Publication, No. 109)
- Biomedical Applications of Synthetic Biodegradable Polymers
- Biomimetics : Design and Processing of Materials (Aip Series in Polymers and Complex Materials)
- Biorelated
Polymers and Gels : Controlled Release and Applications in Biomedical
Engineering (Series in Polymers, Interfaces, and Biomaterials)
- Blow Molding Design Guide
- Blow Molding Handbook : Technology
- Blow Molding Handbook : Technology, Performance, Markets, Economics : The Complete Blow Molding Operation
- Blow Molding Machinery Nomenclature
- Boron Reinforced Epoxy Systems (Materials Technology Ser.)
- Carbon and High Performance Fibres Directory
- Carbon Black
- Carbon Fibers : Technology, Uses, and Prospects
- Carbon Reinforced Epoxy Systems
- Carbon Reinforced Epoxy Systems (Materials Technology Series Vol 13)
- Carbon Reinforced Epoxy Systems (Materials Technology Series Vol 9)
- Carbon Reinforced Epoxy Systems (Materials Technology Series Vol. 15)
- Carbon Reinforced Epoxy Systems (Materials Technology Series, Vol 16)
- Carbon Reinforced Expoxy Systems (Materials Technology Series Vol 8)
- Cellulosic Polymers, Blends and Composites
- Cfc's and the Polyurethane Industry : A Compilation of Technical Publications 1986-1988
- Cfc's and the Polyurethane Industry : A Compilation of Technical Publications 1988-1989
- Cfcs & the Polyurethane Industry : A Compilation of Technical Publications, 1992
- Cfcs and the Polyurethane Industry
- Characterization and Properties of Ultra-High Molecular Weight Polyethylene (Astm Special Technical Publication, 1307)
- Characterization of Plastics by Physical Methods : Experimental Techniques and Practical Application
- Characterization of Solid Polymers : New Techniques and Developments
- Chemical Compatibility & Environmental Stress Crack Resistance (Plastics Design Library)
- Chemical Reactions in Plastics Processing
- Chemistry of Pigments and Fillers
- Coating and Drying Defects : Troubleshooting Operating Problems (Spe Monographs)
- Coextrusion Coating and Film Fabrication
- Colloidal Polymer Particles
- Coloring of Plastics
- Competition
in the Swiss Plastics Manufacturing Industry : A Group Analysis Based
on Micro-Micro Considerations (Contributions in Management Science)
- Complete Automotive Welding : Metals and Plastics
- Composite and Reinforced Elements of Constructions
- Composite Materials : Properties, Nondestructive Testing, and Repair
- Composite Materials in Maritime Structures : Fundamental Aspects (Cambridge Ocean Technology, No 4)
- Composite Materials in Maritime Structures : Practical Considerations (Cambridge Ocean Technology Series 5)
- Composite Materials, : Processing, Fabrication, and Applications
- Composite Sheet Forming (Composite Materials Series, 11)
- Composites : A Design Guide
- Composites Bonding (Stp, 1227)
- Composites Engineering Handbook
- Computer Aided Design of Plasticating Screws : Programs in Fortran and Basic
- Computer Applications in Applied Polymer Science
- Computer Applications in Applied Polymer Science II : Automation, Modelling, and Simulation (Acs Symposium Series, Vol 404)
- Computer Modeling for Extrusion and Other Continuous Polymer Process/N0 9305S-3-446
- Concise Guide to Plastics
- Conference Proceedings from the Polyurethane World Congress 1992 (628718)
- Conference
Record of 1982 Thirty-Fourth Annual Conference of Electrical
Engineering Problems in the Rubber and Plastics Industries (82Ch17485)
- Conformational Theory of Large Molecules : The Rotational Isomeric State Model in Macromolecular Systems
- Construction and Structural Adhesives and Sealants : An Industrial Guide
- Construction Sealants and Adhesives (Wiley Series of Practical Construction Guides)
- Contemporary Topics in Polymer Science : Advances in New Materials
- Controlled-Modified Atmosphere/Vacuum Packaging of Foods
- Corrosion of Plastics and Rubber in Process Equipment-Experiences from the Pulp and Paper Industry
- Corrosion
Resistance Tables : Metals, Nonmetals, Coatings, Mortars, Plastics,
Elastomers and Linings, and Fabrics, Part B (Corrosion Technology, 4 B)
- Corrosion-resistant Plastic Composites in Chemical Plant Design
- Cs 7-87 Cross Linked Polyethylene Insulashielded Power Cables Rated 46-138
- Current Technologies in Flexible Packaging (Astm Special Technical Publication, 912)
- Degradable Polymers, Recycling, and Plastics Waste Management
- Degradation and Stabilisation of Pvc
- Deposition Technologies for Films and Coatings : Developments and Applications
- Design Data for Reinforced Plastics : A Guide for Engineers and Designers
- Design Formulas for Plastics Engineers
- Design of Foam-Filled Structures/With 5 1/4 Floppy Disk
- Design of Plastic Moulds and Dies (Studies in Polymer Science, 3)
- Design With Reinforced Plastics: : A Guide for Engineers & Designers
- Designing Plastic Parts for Assembly
- Designing With Plastics
- Designing With Reinforced Composites : Technology, Performance, Economics (Spe Books)
- Determination of Molecular Weight (Chemical Analysis, Vol 103)
- Development
of Exposure Reduction Strategies and Related Costs for Minimizing
Employee Exposure to Styrene During Filament Winding As Used in the manu
- Development
of Exposure Reduction Strategies and the Realted Costs for Minimizing
Em`loyee Ehposure to Styrene During Hand Lay-Up and Spray-Up As used
- Development
of Exposure Reduction Strategies and the Related Costs for Minimizing
Employee Exposure to Styrene During Hand Lay-Up and Spray-Up As used
- Development
of Exposure Reduction Strategies and the Related Costs for Minimizing
Employee Exposure to Styrene During the Compression Molding of sheet
- Development
of Exposure Reduction Strategies and the Related Costs for Minimizing
Employee Exposure to Styrene During the Injection Molding of Bulk mo
- Development
of Exposure Reduction Strategies and the Related Costs for Minimizing
Employee to Styrene During Fabrication by Compression Molding With r
- Development
of Exposure Reduction Stratigies and the Related Costs for Minimizing
Employee Exposure to Styrene During the Hand Lay-Up and Spray-Up As
- Developments in Food Packaging
- Developments in Injection Moulding
- Developments in Plastics Technology
- Developments in Plastics Technology (Developments Series, Vol 2)
- Developments in Plastics Technology 3
- Developments in Plastics Technology-4 (Developments Series)
- Developments in Reinforced Plastics 3
- Developments in Reinforced Plastics 4
- Developments in Reinforced Plastics 5 : Processing and Fabrication (Developments Series)
- Developments in Reinforced Plastics, 2
- Diaphragm Forming of Continuous Fibre Reinforced Thermoplastics : Process Analysis & Development
- Dictionary of Plastics & Rubber Technology: English/German
- Dictionary of Plastics Engineering
- Dictionary
of Plastics Technology/Worterbuch Kunststofftechnologie :
Englisch-Deutsch. Herausgegeben Von Hans-Dieter Junge (315P)
- Dictionary of Plastics Technology: English/German
- Dictionary of Plastics Testing English/German
- Dubois and Pribble's Plastics Mold Engineering Handbook
- Durability of Structural Adhesives
- Dynamic Loading and Characterization of Fiber-Reinforced Composites
- Early Plastics : Perspectives, 1850-1950
- Effects of Hostile Environments on Coatings and Plastics
- Elasticity and Structure of Polyurethane Networks
- Electrical and Optical Polymer Systems (Plastics Engineering (Marcel Dekker, Inc.), 45.)
- Electronic Packaging : Design, Materials, Process, and Reliability (Electronic Packaging and Interconnection)
- Electronic Packaging and Interconnection Handbook (Electronic Packaging and Interconnection Series)
- Electronic Packaging of High Speed Circuitry (McGraw-Hill Electronic Packaging and Interconnection Series)
- Electronic Systems Quality Management Handbook (Electronic Packaging and Interconnection Series)
- Electronics Packaging Forum : Multichip Module Technology Issues
- Electrophoretic Composite Coatings (Ellis Horwood Series in Polymer Science and Technology)
- Elsevier Directories in Chemistry Part I Catalysis and Part II Membranes
- Emerging Technologies in Plastics Recycling (Acs Symposium Series, 513)
- Emulsion Polymerization and Emulsion Polymers
- Encyclopedia of Plastics Polymers and Resins (Supplement A-Z)
- Encyclopedia of Polymer Science and Engineering
- Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 1
- Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 2
- Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 3
- Encyclopedia of PVC, Second Edition, Revised and Expanded Vol 4
- Engineered Interfaces in Fiber Reinforced Composites
- Engineered Materials Handbook : Engineering Plastics
- Engineering
Mechanics of Fibre Reinforced Polymers and Composite Structures (Cism
International Centre for Mechanical Sciences Series No. 348)
- Engineering Plastics
- Engineering Plastics (Engineered Materials Handbook, Vol 2)
- Engineering Plastics : A Handbook of Polyarylethers
- Engineering Plastics : Economic Commission for Europe, Geneva (Ece/Chem/81)
- Engineering Plastics and Composities (Materials Data Series)
- Engineering Thermoplastics
- Engineering Thermoplastics : Polycarbonates, Polyacetals, Polyesters, Cellulose Esters
- Engineering With Fibre-Polymer Laminates
- Engineering with Rigid Pvc
- English-German
Dictionary of Materials and Process Engineering : Comprising Metals,
Plastics, Ceramics, Composites, Manufacturing, Processing, applica
- Enough for One Lifetime : Wallace Carothers, Inventor of Nylon (History of Modern Chemical Sciences)
- Environmental Stress Cracking of Plastics
- European Consumer Packaging Marketing Directory
- Everyday Elegance : 1950s Plastics Design : With Price Guide
- Experimental Strategies for Polymer Scientists and Plastics Engineers (Spe Books)
- Extruder Principles and Operations
- Extrusion : Processes, Machinery, Tooling
- Extrusion : Scientific and Technical Development
- Extrusion Dies for Plastics and Rubber : Design Engineering Computations (Spe Books)
- Extrusion of Plastics
- Facts & Figures of the U.S. Plastics Industry, 1993
- Failure Modes and Mechanisms in Electronic Packages
- Failure of Plastics
- Fatigue of Engineering Plastics
- Fatique and Tribological Properties of Plastics and Elastomers
- Fiber-reinforced Composites
- Fiber-Reinforced Plastic Pressure Vessels : 1992 Asme Boiler and Pressure Vessel Code X (Rx0100)
- Fiberglass
& Composite Materials : An Enthusiast's Guide to High Performance
Non-Metallic Materials for Automotive Racing and Marine Use
- Fiberglass Pipe Design Manual (Manual of Water Supply Operations, M45)
- Fiberglass Reinforced Plastics
- Fiberglass-Reinforced Plastic Pressure Vessels 1986 Asme Boiler and Pressure Vessel Code
- Fibre Reinforced Composites (Mep250)
- Fibre Reinforced-Plastic (Frp Reinforcement for Concrete Structures : Properties and Applications)
- Fibre-Resin Composites : New Applications and Developments
- Fillers
: Proceedings of the Joint Conference of the Plastics and Rubber
Institute and the British Plastics Federation March, 1986
- Film Extrusion 1982
- Film Extrusion Manual-Process Materials, Properties : Process, Materials, Properties
- Finishing Systems Design and Implementation : A Guide for Product Parameters, Coatings, Process, and Equipment
- Finite Element Analysis of Composite Laminates (Solid Mechanics and Its Applications, Vol 7)
- Fire Property Data : Cellular Plastics
- Flame Retardants '92
- Flammability Handbook for Plastics
- Flammability of Cellular Plastics, Part 2
- Flexible Food Packaging : Questions and Answers
- Flexible Printed Circuitry (Electronic Packaging and Interconnection Series)
- Flip Chip Technologies (Electronic Packaging and Interconnection Series)
- Flow Analysis of Injection Molds
- Foam and Foam Films : Theory, Experiment, Application (Studies in Interface Science, V. 5.)
- Foams : Fundamentals and Applications in the Petroleum Industry (Advances in Chemistry Series, No 242)
- Food and Packaging Interactions (Acs Symposium Series, 365)
- Food and Packaging Interactions II (Acs Symposium Series, No. 473)
- Food Packaging
- Food Packaging and Preservation
- Food Packaging Technology
- Food Packaging Technology (Astm Special Technical Publication, 1113)
- Food Product
- Food Science Reviews
- Food Science Reviews : Chemical Migration from Packaging
- Foodplas Nine 1992 : Main Conference
- Foodplas
Vi-89 Plastics in Food Packaging : Proceedings from the Sixth Annual
Foodplas Conference/March 7-9, 1989 Orlando, Florida
- Foodplas
Vii-90 : Plastics in Food Packaging : Proceedings from the Seventh
Annual Foodplas Conference March 5-8, 1990 New Orleans, Louisiana
- Foodplas,
Viii-91 : Plastics in Food Packaging : Proceedings of the 8th Annual
Foodlas Conference March 5-7, 1991 Orlando, Florida
- Foods and Packaging Materials-Chemical Interactions (Royal Society of Chemistry Special Publication, No 162)
- Formulating Plastics and Elastomers by Computer
- Fracture Mechanics of Composite Material Laminates
- Fundamental Principles of Polymeric Materials (Society of Plastics Engineers Monographs)
- Fundamentals of Adhesion
- Fundamentals of Adhesion and Interfaces
- Giant Molecules : Essential Materials for Everyday Living and Problem Solving (Spe Monographs)
- Giant Molecules : Here, There, and Everywhere...
- Glass Reinforced Epoxy System (Materials Technology Ser: Vol 10)
- Glass Reinforced Plastics
- Glass Reinforced Polyester Systems (Materials Technology Series, Vol 14)
- Guide for the Selection of Polymer Adhesives With Concrete/503.5R.92
- Handbook of Adhesive Technology
- Handbook of Adhesives Raw Materials
- Handbook of Coatings Additives
- Handbook of Deposition Technologies for Films and Coatings : Science, Technology and Applications
- Handbook of Dimensional Measurement
- Handbook of Elastomers
- Handbook of Fillers for Plastics
- Handbook of Hazardous and Toxic Properties of Polymer Chemicals
- Handbook of Paint and Coating Raw Materials
- Handbook of Paint and Coating Raw Materials : Chemical Products With Trade Name Cross-Reference
- Handbook of Paint and Coating Raw Materials : Trade Name Products
- Handbook
of Plastic and Rubber Additives : An International Guide to More Than
13,000 Products by Trade Name, Chemical, Function, and Manufacturer
- Handbook of Plastic Compounds, Elastomers and Resins : An International Guide by Category, Tradename, Composition and Supplier
- Handbook of Plastic Foams : Types, Properties, Manufacture and Applications
- Handbook of Plastic Materials and Technology
- Handbook of Plastics Joining : A Practical Guide (Pdl Handboook Series)
- Handbook of Plastics Test Methods
- Handbook of Plastics Testing Technology
- Handbook of Plastics Testing Technology (Society of Plastics Engineers Monographs)
- Handbook of Plastics Testing Technology (Society of Plastics Engineers Monographs) - Ainda não publicado
- Handbook of Plastics, Elastomers, and Composites
- Handbook
of Polymer Coatings for Electronics : Chemistry, Technology and
Applications (Materials Science and Process Technology Series)
- Handbook of Polymer Synthesis
- Handbook of Polymeric Foams and Foam Technology
- Handbook of Polyolefins
- Handbook of Polyvinyl Chloride Formulating
- Handbook of Radical Vinyl Polymerization (Plastics Engineering)
- Handbook of Short Fiber Reinforced Plastics
- Handbook of Solid Modeling
- Handbook of Thermoplastic Elastomers
- Handbook of Thermoplastic Piping System Design
- Handbook of Thermoplastics
- Handbook of Thermoplastics Injection Mould Design
- Handbook of Toxic Properties of Monomers and Additives
- Hazardous Chemicals in the Polymer Industry
- Heterogeneous Modification of Polymers : Matrix and Surface Reactions
- High Nitrile Polymers for Beverage Container Applications
- High Performance Polymers and Composites (Encyclopedia Reprint Series)
- How to Make Injection Molds (Spe Books)
- How to Manage Plastics Waste : Technology and Market Opportunities (Polymer Processing Institute)
- Hydraulics for Operators (Operator's Guide Series)
- Ici Polyurethanes Book
- IEEE Rubber and Plastics Industry Technical Conference 1990 (Order #Ch2862)
- Impact Modifiers for Pvc : The History and Practice (Spe Monographs Series)
- Improving Tamper-Evident Packaging : Problems, Tests and Solutions
- Industrial Applications of Adhesive Bonding
- Industrial Color Testing: Fundamentals and Techniques
- Industrial Inorganic Pigments
- Industrial Materials : Polymers, Ceramics and Composites
- Industrial Organic Pigments : Production, Properties, Applications
- Industrial Packaging Adhesives
- Industrial Plastics : Theory and Application
- Information Sources in Polymers and Plastics (Guides to Information Sources)
- Infrared Spectra Handbook of Adhesives and Sealants
- Injection and Compression Molding Fundamentals
- Injection Molding : An Introduction
- Injection Molding : Theory and Practice
- Injection Molding Machines : A User's Guide
- Injection Molding of Engineering Thermoplastics (Pocket Guides to Plastics)
- Injection Molding of Thermoplastic Materials (Pocket Guides to Plastics)
- Injection Molding of Thermoplastics Materials (Pocket Guides to Plastics)
- Injection Molds : 108 Proven Designs
- Injection Moulding Machines
- Injection/Transfer Molding of Thermosetting Plastics
- Innovation : Award-Winning Industrial Design
- Innovation in Polymer Processing : Molding
- Instrument Engineers' Handbook, Volume 1: Process Measurement
- Instrument Engineers' Handbook, Volume 2: Process Control
- Instrumentation and Automation in the Paper, Rubber, Plastics and Polymerization Industries
- Instrumentation for Thermoplastics Processing
- Instrumented Impact Testing of Plastics and Composite Materials : A Symposium (Astm Special Technical Publication, 936)
- Integrated Circuit, Hybrid, and Multichip Module Package Design Guidelines : A Focus on Reliability
- Interfacial Aspects of Multicomponent Polymer Materials (The Language of Science)
- Internal Stresses, Dimensional Instabilities and Molecular Orientations in Plastics
- International Plastics Flammability Handbook : Principles Regulations Testing and Approval
- International Progress in Urethanes
- Introduction to Design and Analysis With Advanced Composite Materials
- Introduction to Plastics and Composites
- Introduction to Polymer Dynamics (Lezioni Lincee Lectures)
- Introduction to Polymer Physics
- Introduction to Polymer Viscoelasticity
- Inventing
Polymer Science : Staudinger, Carothers, and the Emergence of
MacRomolecular Chemistry (Chemical Sciences in Society Series)
- Ionomers : Characterization, Theory, and Applications
- Iso and Iec Selected Standards for the Plastics Industry
- Iso Handbook Twenty-One on Plastics : 1990
- Joining Fibre-Reinforced Plastics
- Key Day Planner C/Ww95/Us
- Key Design Center 3D C/M&W/Us
- Key Form Designer C/Ww95/Us
- Key Label Designer C/Win/Us
- Key Master Maps C/Ww95/Us
- Key Multimedia Greetings C/Ww95/Us
- Key Photo Gallery C/Win/Us
- Key Resume Designer C/Win/Us
- Lactam-Based Polyamides : Modification, Technology, and Application
- Liquid Film Coating : Scientific Principles and Their Technological Implications
- Liquid
Moulding Technologies : Resin Transfer Moulding, Structural Reaction
Injection Moulding, and Related Processing Techniques
- Low Density Cellular Plastics : Physical Basis of Behaviour
- Machinery Adhesives for Locking, Retaining, and Sealing
- MacRocyclic Polyether Syntheses (Reactivity and Structure : Concepts in Organic Chemistry, V. 13)
- Managing Corrosion With Plastics
- Manual of Plastics Analysis
- Manual on Determination of Volatile Organic Compound (Voc Content in Paints, Inks, and Related Coating Products)
- Manufacture
of Printed Materials for Use in the Packaging and Labelling of
Medicinal Products (Iso-9000 : Codes of Practice for Pharmaceutical)
- Marketing/Technical Sessions of the Composites Institute's 48th Annual Conference and Expo '93 February 8-11, 1993
- Materials for Conservation : Organic Consolidants, Adhesives and Coatings (Butterworths Series in Conservation and Museology)
- Materials for Electronic Packaging
- Materials Science of Polymers for Engineers
- Measuring Process Capability : Techniques and Calculations for Quality and Manufacturing Engineers
- Mechanical Behaviour of Composites and Laminates
- Mechanical Fastening of Plastics
- Mechanics of Composite Materials (Mechanical Engineering Series)
- Mechanics of Fibrous Composites
- Mechanics of Laminated Composite Plates : Theory and Analysis
- Mechanics of Plastics and Plastic Composites/H00541
- Medical and Hospital Plastic Products : A Special Report on New Applications and Current Research
- Medical Device Packaging Handbook
- Melt Rheology and Its Role in Plastics Processing : Theory and Applications
- Metal Filled Polymers
- Metallization of Polymers (Acs Symposium Series, No 440)
- Metallized Plastic
- Metallized Plastics 2 : Fundamental and Applied Aspects
- Metallized Plastics 3 : Fundamental and Applied Aspects
- Metallized Plastics : Fundamental and Applied Aspects
- Metallurgy and Plastics for Engineers
- Metodos Sencillos De Identificacion De Plasticos 2/E
- Micromechanical Modelling of the Transverse Strenghts of Unidrectional Glass Fibre Reinforced Polyester
- Microstructural Characterisation of Fibre-Reinforced Composites
- Mixed Plastics Recycling Technology
- Mixing in Polymer Processing
- Modelling of the Impact Response of Fibre-Reinforced Composites
- Modern Coating and Drying Technology (Advances in Interfacial Engineering Series)
- Modern Fluoropolymers : High Performance Polymers for Diverse Applications (Wiley Series in Polymer Science)
- Modern
Methods of Polymer Characterization (Chemical Analysis : A Series of
Monographs on Analytical Chemistry and It's Applications, Vol 113)
- Modern Plastics Ency 97/E
- Modern Plastics Encyclopedia 1991
- Modern Plastics Encyclopedia, 1985-86
- Modern Plastics Encyclopedia, 1986-87
- Modern Plastics Encylclopedia, 1994
- Modified Polyester Fibres (Textile Science and Technology, Vol 10)
- Molded Thermosets : A Handbook for Plastics Engineers, Molders, and Designers
- Molding of Thermosetting Plastics (Pocket Guides to Plastics)
- Molecular Dynamics of Additives in Polymers
- Moving
Ahead With Iso 14000 : Improving Environmental Management and Advancing
Sustainable Development (Wiley Series in Environmental Quality manageme
- Multicomponent Polymer Materials (Advances in Chemistry Series, 211)
- N-Nylons : Their Synthesis, Structure, and Properties
- New Advances in Polyolefins (The Language of Science)
- New Applications of Plastic Components in Vehicle Design (Sp (Society of Automotive Engineers), 1166)
- New Characterization Techniques for Thin Polymer Films (Spe Monographs)
- New Developments in Polymer Composites for Automotive Applications (Sp-784)
- New Fibres and Their Composites
- New Plastics Applications for the Automotive Industry (S P (Society of Automotive Engineers), Sp 1253)
- New Polymer Technology for Auto Body Exteriors (Aiche Symposium Series, No 260 Vol 84)
- New Technology-Shifting Markets : The Plastics Industry Responds to a Wave of Change
- Noah IV : Directory of International Package Design
- Noah V : Directory of International Package Design
- Non-Destructive Testing of Fibre-Reinforced Plastics Composites
- Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids
- Nylon Plastics Handbook
- Occupational
Health Program Manufacturing Feasibility Study : Development of
Exposure Reduction Strategies... During Compression Molding of Bmc
- Oligomer Technology and Applications
- Organic Coatings
- Organic Coatings : Science and Technology : Applications, Properties, and Performance (Spe Monographs)
- Organic Coatings : Science and Technology : Film Formation, Components, and Appearance (Spe Monographs)
- Organic Coatings for Corrosion Control (Acs Symposium Series, No 689)
- Package Design : Jpda Member's Work Today 1994
- Packaging & Marketing Index in Japan 1987
- Packaging : Food Cycle Technology Source Books
- Packaging Alternatives for Food Processors
- Packaging and Environmental Issues
- Packaging and Solid Waste : Management Strategies (Ama Management Briefing)
- Packaging and the Environment
- Packaging and the Environment : Alternatives, Trends and Solutions
- Packaging Buyers' Guide, 1994 : Supplemental Source Guide
- Packaging Design ((Issues in Design Ser.))
- Packaging of Electronic Systems : A Mechanical Engineering Approach (McGraw-Hill Series in Mechanical Engineering)
- Packaging of Healthcare Devices and Products V : Fifth Annual Healthpack Conference, November 2-3, 1995. North-Brook, Il
- Packaging of Pharmaceuticals and Healthcare Products
- Packaging Sourcebook 1997
- Packaging Sourcebook : International 1998 (Serial)
- Packaging Sourcebook : North America 1998 (Serial)
- Paint and Coating Testing Manual : Fourteenth Edition of the Gardner-Sward Handbook (Astm Manual, Mnl 17)
- Paint Flow and Pigment Dispersion : A Rheological Approach to Coating and Ink Technology
- Partners
for Progress : Ufex-12 Conference of the Polyurethane Foam
Contractors.Div of the Soc of the Plastics Industry Inc, Feb 14-18, 1987
- Photonic Polymer Systems (Plastics Engineering)
- Physical Properties of Polymers Handbook (Aip Series in Polymers and Complex Materials)
- Physics of Plastics : Processing, Properties and Materials Engineering
- Physics of Plastics : Processing, Properties, and Materials Engineering
- Physics of Polymer Surfaces and Interfaces
- Pigment Handbook
- Pigment Handbook : Properties and Economics
- Pioneer Plastic : The Making and Selling of Celluloid
- Pioneers in Polymer Science (Chemists and Chemistry)
- Plasma Processing of Polymers (NATO Asi Series. Series E, Applied Sciences, No. 346.)
- Plastic : The Making of a Synthetic Century
- Plastic Blow Molding Handbook
- Plastic Component Design
- Plastic Design to Bs 5950
- Plastic Film Technology : Extrusion of Plastic Film and Sheeting
- Plastic Optical Fibres : Practical Applications : Club Des Fibres Optiques Plastiques (Cfop) France
- Plastic Part Technology
- Plastic-Encapsulated Microelectronics : Materials, Processes, Quality, Reliability, and Applications
- Plasticisers : Principles and Practice
- Plasticity and Creep : Theory, Examples, and Problems
- Plastics : America's Packaging Dilemma : Environmental Action Coalition (Island Press Critical Issues Eries, No. 3)
- Plastics : Components, Processes and Technology (S P (Society of Automotive Engineers), 1340)
- Plastics : Microstructure and Engineering Applications
- Plastics : Molding the Past, Shaping the Future (Encyclopedia of Discovery and Inventions Series)
- Plastics : Product Design and Process Engineering (Spe Books)
- Plastics Additives : An Industrial Guide
- Plastics Additives and Modifiers Handbook
- Plastics and Design
- Plastics and Plastic Composites : Material Properties, Part Performance, and Process Simulation (Md, Vol 29)
- Plastics and Polymer Processing Automation
- Plastics and Resin Compositions
- Plastics and Technology (Australian Technology Series)
- Plastics Compounding : Equipment and Processing (Polymer Processing Institute Books from Hanser Publishers)
- Plastics Engineering
- Plastics Engineering Dictionary : English-German-French-Russian
- Plastics Extrusion Technology
- Plastics Extrusion Technology Handbook
- Plastics Films
- Plastics for Electronics : Materials, Properties, and Design Applications (Electronic Packaging and Interconnection)
- Plastics for Engineers : Materials, Properties, Applications
- Plastics for Food Packaging : U.S. Materials, Applications, Markets
- Plastics from Microbes : Microbial Synthesis of Polymers and Polymer Precursors
- Plastics Gearing
- Plastics Handbook
- Plastics in a World Economy
- Plastics in Automobile Instrument Panels, Trim and Setting (Sp-822)
- Plastics in Automobiles : Bumper Systems, Interior Trim, Instrument Panels, and Exterior Panels (Sp-772)
- Plastics in Automotive Applications : An Overview (Progress in Technology, No. 32)
- Plastics in Automotive Engineering : Materials, Components, Systems
- Plastics in Food Packaging
- Plastics in Medicine : Science and Law : Subject Analysis Index With Reference Bibliography
- Plastics in Medicine, Science and Law : Subject Analysis Index With Reference Bibliography
- Plastics in Passenger Cars (S P, 566)
- Plastics in the Automobile Industry (R0147)
- Plastics Industry Safety Handbook
- Plastics Materials
- Plastics Molding : Equipment, Processes, and Materials
- Plastics Processing Data Handbook
- Plastics Processing Technology
- Plastics Products Design Handbook
- Plastics Recognized Component Directory 1997
- Plastics Recognized Components Directory 1995
- Plastics Recognized Components Directory 1996
- Plastics Recycling : Products and Processes With 77 Figures and 98 Tables
- Plastics
Recycling As a Business Opportunity : May 20-21, 1993 Doubletree Hotel
Arlington, Virginia : Recyclingplas VIII Conference
- Plastics Recycling As a Future Business Opportunity : Proceedings (Recycling Pas III Conference May 1988)
- Plastics
Recycling As a Future Business Opportunity : Proceedings Technology
Exchange Program May 23-24, 1990 at the Mayflower Hotel Washington, D.C.
- Plastics Recycling As a Future Business Opportunity : Proceedings Technology Exchange Program Recyclingplas IV Conference
- Plastics Recycling As a Future Business Opportunity : Proceedings/Technology Exchange Program
- Plastics Technical Dictionary : English-German German-English Illustrated Systematic Groups
- Plastics Technology Handbook
- Plastics Technology Handbook (Plastics Engineering, Vol 26)
- Plastics Technology Manufacturing Handbook and Buyer's Guide
- Plastics Waste
- Plastics Waste Management
- Plastics, Rubber, and Paper Recycling : A Pragmatic Approach (Acs Symposium Series, 609)
- Polyester
- Polyester Molding Compounds
- Polyimides
- Polyimides
: Materials, Chemistry and Characterization : Proceedings of the Third
International Conference on Polyimides, Ellenville, New York, Novem
- Polymer Composites Applications for Motor Vehicles (S P, No 850)
- Polymer Composites for Civil and Structural Engineering
- Polymer Concrete/Sp-137
- Polymer Extrusion (Spe Books)
- Polymer Handbook
- Polymer Mixing : A Self-Study Guide
- Polymer Mixing and Extrusion Technology
- Polymer Modification
- Polymer Powder Technology
- Polymer Process Engineering
- Polymer Processing : Principles and Design
- Polymer Science and Technology
- Polymer Surface Modification : Relevance to Adhesion
- Polymer Surfaces : From Physics to Technology
- Polymer Surfaces from Physics to Technology
- Polymer Syntheses (Organic Chemistry (New York, N.Y.), V. 29.)
- Polymer Synthesis and Characterization : A Laboratory Manual
- Polymer Technology Dictionary
- Polymer Thick Film : Today's Emerging Technology for a Clean Environment Tomorrow
- Polymer Toughening
- Polymeric Compatibilizers : Uses and Benefits in Polymer Blends
- Polymeric Foams : Science and Technology (Acs Symposium Series, 669)
- Polymeric Materials and Processing : Plastics, Elastomers and Composites
- Polymeric Materials Encyclopedia
- Polymeric Materials for Electronics Packaging and Interconnection (Acs Symposium Series, 407)
- Polymers
and Biomaterials : Proceedings of the Symposia E, Advanced Engineerings
Plastics, F, Funcional Polymers, and L, Biomedical Materials of the
- Polymers and Plastics : What Every Chemical Technologist Wants to Know About...
- Polymers As Materials for Packaging (Ellis Horwood Series in Polymer Science and Technology)
- Polymers in Microelectronics : Fundamentals and Applications
- Polypropylene : Structure, Blends and Composites : Composites
- Polypropylene : Structure, Blends and Composites : Structure and Morphology
- Polypropylene
: Structure, Blends and Composites : Structure and MorpPolypropylene
and Other Polyolefins : Polymerization and Characterization (Studies in
Polymer Science, No. 7)
- Polypropylene Handbook : Polymerization, Characterization, Properties, Processing, Applications
- Polypropylene Structure, Blends and Composites : Copolymers and Blends
- Polyurethane
: New Paths to Progress, Marketing, Technology : Proceedings of the Spi
6th International Technical/Marketing Conference, 1983
- Polyurethane Elastomers
- Polyurethane Foam Sorbents in Separation Science
- Polyurethane Handbook : Chemistry
- Polyurethane Marketing and Technology : Partners in Progress
- Polyurethanes
90 : Proceedings of the Spi 33rd Annual Technical/Marketing Conference
: September 30-October 3, 1990 Orlando, Florida
- Polyvinyl Alcohol : Developments
- Polyvinyl Alcohol Fibers
- Polyvinylchloride : Environmental Aspects of a Common Plastic
- Practical Analysis of Composite Laminates
- Practical Application of Spc in the Flexible Packaging Industry
- Practical Hydraulics Handbook
- Practical Thermoforming
- Prediction of Polymer Properties (Plastics Engineering Series, Vol 27)
- Pressure-Sensitive Adhesives Technology
- Principles and Applications of Modified Atmosphere Packaging of Foods
- Principles of Composite Material Mechanics (McGraw-Hill Series in Mechanical Engineering)
- Principles of Modified-Atmosphere & Sous Vide Product Packaging
- Principles of Plastics Extrusion : A Teaching Programmer
- Principles of Polymer Chemistry
- Principles of Polymer Engineering
- Principles of Polymer Processing
- Principles of Polymerization
- Print Buyer's Bible : Packaging
- Processes for Major Addition-Type Plastics and Their Monomers
- Processing and Packaging of Heat Preserved Foods
- Product Design and Testing of Polymeric Materials
- Product Design With Plastics : A Practical Manual
- Production and Packaging of Non-Carbonated Fruit Juices and Fruit Beverages
- Pvc : Production, Properties and Uses
- Qualifications
Start Ups & Tryouts of Injection Molds : How to Start Up New
Tooling, How to Keep Tools Optimized, How to Qualify New Tooling
- Quality Assurance of Polymeric Materials and Products (Astm Special Technical Publication, No 846)
- Quality Assurance Report
- Quality Control of Packaging Materials in the Pharmaceutical Industry
- Quality Handbook for Composite Materials
- Quality Rules in Packaging
- Radiation-Chemical Processes in Solid Phase : Theory and Application
- Rapra New Trade Names in the Rubber and Plastics Industries, 1986
- Rauch Guide to the U S Adhesives and Sealants Industry (Rauch Industrial Marketing Guide)
- Rauch Guide to the U.S. Plastics Industry, 1997 (Rauch Industrial Marketing Guide)
- Raw Materials Data Handbook : Pigments
- Raw Materials for Pigments Fillers and Extenders
- Reaction Injection Molding : Polymer Chemistry and Engineering (A C S Symposium Series, No 270)
- Reaction Injection Molding and Fast Polymerization Reactions
- Reaction Injection Molding Machinery and Processes
- Reaction
Polymers : Polyurethanes, Epoxies, Unsaturated Polyesters, Phenolics,
Special Monomers and Additives : Chemistry, Technology, Applications
- Reaction
Polymers : Polyurethanes, Epoxies, Unsaturated Polyesters, Phenolics,
Special Monomers and Additives : Chemistry, Technology, Applications,
- Reactive Extrusion
- Reactive Extrusion : Principles and Practice (Polymer Processing Institute)
- Recycling and Recovery of Plastics
- Recyclingplas
II Conference : Plastics Recycling As a Future Business Opportunity
(Proceedings of the Technology Exchange Program)
- Recyclingplas IV Plastics Recycling
- Reinforced Plastics : Properties and Applications
- Reinforced Plastics for Commercial Composites : Source Book
- Reinforced Plastics Handbook
- Resin Transfer Moulding
- Resins (What Every Chemical Technologists Wants to Know, No 5)
- Resins Committee Test Procedures
- Resins for Coatings : Chemistry, Properties and Applications
- Returnable and Non-Returnable Packaging : The Management of Waste and Resources Towards an Eco-Social Market Economy
- Rheological Fundamentals of Polymer Processing (NATO Asi Series. Series E, Applied Sciences, Vol. 302)
- Rheometers for Molten Plastics : A Practical Guide to Testing and Property Measurement
- Rigid and Semi-Rigid Plastic Containers
- Rim : Fundamentals of Reaction Injection Molding
- Rosato's Plastics Encyclopedia and Dictionary
- Rotational Moulding of Plastics (Polymer Engineering Series, 2)
- Rotational Moulding of Plastics (Polymer Engineering Series, No 1)
- Rubber Compounding
- Rubber Toughened Engineering Plastics
- Rubber-Toughened Plastics (Advances in Chemistry Series, 222)
- Saechtling International Plastics Handbook : For the Technologist, Engineer and User
- Science and Technology of Building Seals, Sealants, Glazing, and Waterproofing : 3rd Volume/Stp 1254
- Science and Technology of Rubber
- Secondary Reclamation of Plastics Waste : Research Report Phase 1 : Development of Techniques for Preparation and Formulation
- Secrets of Building a Plastic Injection Molding Machine
- Selected Astm Standards on Packaging
- Selecting Thermoplastics for Engineering Applications
- Sheet Molding Compound Materials : Science & Technology
- Short Fiber Reinforced Composite Materials-Stp 772
- Side-Chain Liquid Crystalline Polycarbonates : Synthesis, Mesomorphic Properties & Dielectric & Mechanical Analysis
- Silane Coupling Agents
- Simple Methods for Identification of Plastics
- Simple Methods for Identification of Plastics : With the Plastics Identification Table by Hansjurgen Saechtling
- Smart Autoclave Cure of Composites
- Some
Chemicals Used in Plastics and Elastomers (Iarc Monographs on the
Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol 39)
- Sourcebook of Advanced Polymer Laboratory Preparations
- Spatially Reinforced Composites
- Spe Forty-Seventh Annual Technical Conference and Exhibits : Plastics Create a World of Difference (Order No. 419)
- Spectra for the Identification of Additives in Food Packaging
- Spectra for the Identification of Monomers in Food Packaging
- Stabilization of Polymeric Materials (MacRomolecular Systems, Materials Approach)
- Stains & Polyurethane
- Standards and Guidelines for Electroplated Plastics
- Statistical Physics of Macromolecules (AIP Series in Polymers and Complex Materials)
- Step-By-Step Compo and Mold Making
- Stress Analysis of Fiber-Reinforced Composite Materials
- Structural Adhesives Directory and Databook
- Structural Analysis of Thermoplastic Components
- Structural Foam
- Structural Plastics Design Manual (Asce Manuals and Reports on Engineering Practice, No 63)
- Structural Plastics Selection Manual (Asce Manuals and Reports on Engineering Practice, No 66)
- Styrene-Based Plastics and Their Modification (Ellis Horwood Series in Polymer Science and Technology)
- Superabsorbent Polymers : Science and Technology (Acs Symposium Series, No 573)
- Superplastic Deformation
- Surface Analysis of Polymers by Xps and Static Sims (Cambridge Solid State Science Series)
- Surface Preparation Techniques for Adhesive Bonding (Materials Science and Process Technology Series)
- Synthetic Adhesives and Sealants (Critical Reports on Applied Chemistry, Vol 16)
- Synthetic Biodegradable Polymer Scaffolds (Tissue Engineering)
- Synthetic Polymers : Technology, Porperties, Applications
- Technician's Handbook of Plastics
- Temperature Measurement
- Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam (D747)
- Test Method for Density of Plastics by the Density-Gradient Technique (D1505)
- Test Method for Tensile Properties of Plastics (D638)
- Test Method for Water Absorption of Plastics (D570)
- Test Methods for Deformation of Plastics Under Load (D621)
- Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (D790)
- Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials (D256)
- Test Methods for Specific Gravity (Relative Density and Density of Plastics by Displacement)
- Textbook of Polymer Science
- The
Additives for Plastics Handbook : Antioxidants, Antistatics,
Compatibilisers, Conductive Fillers, Flame-Retardants, Pigments,
Plasticisers, reinfo
- The Amazon Rubber Boom, 1850-1920
- The Basics of Testing Plastics : Mechanical Properties, Flame Exposure, and General Guidelines (Astm Manual Series, Mnl 35)
- The Blueprint for Plastics Recycling
- The Cnc Workbook : An Introduction to Computer Numerical Control/Book and Disk
- The Current Status of Tamper Evident Packaging for Foods : A Field Survey
- The Development of Plastics Processing Machinery and Methods (Spe Monographs)
- The Development of Rubber Forming As a Rapid Thermoforming Technique for Continuous Fibre Reinforced Thermoplastic Composites
- The Effect of Creep : And Other Time Related Factors on Plastics
- The Effect of Sterilization on Plastics & Elastomers (Pdl Handbook Series)
- The Effect of Uv Light and Weather on Plastics and Elastomers (Pdl Handbook Series)
- The Effects of Creep and Other Time Related Factors on Plastics (Plastics Design Library)
- The Fiberglass-Reinforced and Composite Plastics Industry : Guides to Pollution Prevention
- The
First IEEE International Symposium on Polymeric Electronics Packaging :
October 26-30, 1997, Louis De Geer Congress Center, Norrkoping, Sweden
: p
- The Iso 9000 Documentation Toolkit : 1994 Revised Iso 9001 Standard/Book and Disk
- The Iso 9000 Quality Manual Developer : 1994 Revised Iso 9001 Standard (Iso Solutions Series)
- The Legend of Goodyear : The First 100 Years
- The Manufacturing Technology of Continuous Glass Fibres (Glass Science and Technology, Vol 6)
- The Mechanics of Thin Film Coatings, Proceedings of the First European Coating Symposium
- The Mixing of Rubber
- The Packaging Designer's Book of Patterns
- The Physics of Polymers : Concepts for Understanding Their Structures and Behavior
- The Plastic Waste Primer/a Handbook for Citizens
- The Plastics Age : From Bakelite to Beanbags and Beyond
- The Polyurethane Industry Directory and Buyer's Guide, 1993
- The Science and Engineering of Thermal Spray Coatings
- The Science of Heterogeneous Polymers : Structure and Thermophysical Properties
- The
Science of Polymer Molecules : An Introduction Concerning the
Synthesis, Structure and Properties of the Individual Molecules That
Constitute poly
- The Theory of Polymer Dynamics (International Series of Monographs on Physics)
- The Vibrational Spectroscopy of Polymers (Cambridge Solid State Science)
- The Wiley Encyclopedia of Packaging Technology
- The
Wiley Polymer Networks Group Review Series : Chemical and Physical
Networks : Formation and Control of Properties (The Wiley Polymer
Networks grou
- Theoretical
and Mathematical Models in Polymer Research : Modern Methods in Polymer
Research and Technology (Polymers, Interfaces, and Biomaterials)
- Thermal Characterization of Polymeric Materials
- Thermal Processing of Packaged Foods
- Thermoforming
- Thermoforming : A Plastics Processing Guide
- Thermoplastic
Aromatic Polymer Composites : A Study of the Structure, Processing and
Properties of Carbon Fibre Reinforced Polyetheretherketone and R
- Thermoplastic Elastomers
- Thermoplastic Matrices and Composites
- Thermoplastic Melt Rheology and Processing
- Thermoplastic Polymer Additives
- Thermoplastics Directory and Databook
- Toughened Plastics I : Science and Engineering (Advances in Chemistry, No 233)
- Toughened Plastics II : Novel Approaches in Science and Engineering (Advances in Chemistry Series, 252)
- Training in Injection Molding : A Text- And Workbook (Spe Books)
- Training Tomorrows Plastics Workers
- Transducers and Their Elements : Design and Application
- Transnational Corporations in the Plastics Industry/E 90 II A 1
- Treatise on Adhesion and Adhesives
- Tribology of Plastic Materials : Their Characteristics and Applications to Sliding Components (Tribology, Series Vol 16)
- Twin Screw Extruders : A Basic Understanding
- Ullmann's Encyclopdia of Industrial Chemistry, 5E, Vol. A21, Plastics, Properties and Testing to Polyviny Compounds, Others
- Ultra-High Molecular Weight Polyethylene As Biomaterial in Orthopedic Surgery
- Understanding Injection Molding Technology (Hanser Understanding Books)
- Use of Plastics and Plastic Composites : Materials and Mechanical Issues
- Vinyl Plastics : A World View of the Industry and Market
- Water Soluble Poly-N-Vinylamides : Synthesis and Physicochemical Properties
- Water-Soluble Polymers
- Wear and Wear Protection in Plastics Processing
- Wear in Plastics : Processing Pheneomenon and Protection, November 13-14, 1990
- What Every Engineer Should Know about Developing Plastics Products
- Whittington's Dictionary of Plastics
- Whos Who in World Petrochemicals and Plastics
- World Plastics Outlook Conference : The Recovering Global Economy for Plastics
- Worldwide Application of Plastics
Books list 1
Article Details
Last Updated
18th of November, 2008
Would you like to...
User Opinions (0 votes)
No users have voted.How would you rate this answer?
Related Articles
No related articles were found.Attachments
No attachments were found.Visitor Comments
-
Comment #1 (Posted by Traneric
)
Really helpful. If our staff have good knowledge with these source, our <a href="http://vinapackingfilms.com">Stretch Film Manufacturing </a> will be strong